Conrader SRV250-14 High-Flow Safety Relief Valve - 1/4" MNPT, Select PSI
Conrader SRV250-14 High-Flow Safety Relief Valve - 1/4" MNPT, Select PSI
Couldn't load pickup availability
View full details
Product Description
Conrader SRV250-14 High-Flow Safety Relief Valve
Brass air compressor safety relief valve with a 1/4" male NPT inlet and a silicone soft seat. Select the preset pressure required by your equipment. Each option is a separate valve with its own pressure setting and relieving capacity.
Ingersoll Rand Replacement References
- 200 PSI option — Replaces Ingersoll Rand 56270713. Select the 200 PSI / 173 SCFM valve.
- 225 PSI option — Replaces Ingersoll Rand 22052450. Select the 225 PSI / 194 SCFM valve.
These are Conrader aftermarket valves. Match the listed pressure setting, 1/4" NPT connection and the equipment’s required relieving capacity.
Specifications
| Manufacturer | Conrader |
|---|---|
| Base model | SRV250-14 (manufacturer notation: SRV250-1/4) |
| Inlet connection | 1/4" male NPT |
| Valve type | High-flow soft-seat safety relief / pop-off valve |
| Body | Brass |
| Standard seal | Silicone |
| Spring | 17-7 stainless steel |
| Pressure setting | Choose one preset setting from 25–350 PSIG |
| Relieving capacity | 31–295 SCFM, depending on selected pressure; see chart below |
| Operating temperature | −65°F to 400°F (standard silicone configuration) |
| Set-pressure tolerance | ±2 PSIG through 70 PSIG; ±3% above 70 PSIG |
| Standard code configuration | ASME BPVC Section XIII; CSA B51 |
Pressure Settings and Relieving Capacity
The pressure selector identifies the preset pressure and corresponding relieving capacity in SCFM (standard cubic feet per minute). This capacity is not the compressor's normal operating airflow.
| 25 PSIG | 31 SCFM |
|---|---|
| 35 PSIG | 39 SCFM |
| 50 PSIG | 51 SCFM |
| 60 PSIG | 59 SCFM |
| 70 PSIG | 67 SCFM |
| 75 PSIG | 71 SCFM |
| 80 PSIG | 75 SCFM |
| 90 PSIG | 84 SCFM |
| 100 PSIG | 92 SCFM |
| 110 PSIG | 100 SCFM |
| 120 PSIG | 108 SCFM |
| 125 PSIG | 112 SCFM |
| 135 PSIG | 120 SCFM |
| 140 PSIG | 124 SCFM |
| 150 PSIG | 132 SCFM |
| 160 PSIG | 141 SCFM |
| 165 PSIG | 145 SCFM |
| 170 PSIG | 149 SCFM |
| 175 PSIG | 153 SCFM |
| 180 PSIG | 157 SCFM |
| 190 PSIG | 165 SCFM |
| 200 PSIG | 173 SCFM |
| 215 PSIG | 185 SCFM |
| 225 PSIG | 194 SCFM |
| 250 PSIG | 214 SCFM |
| 260 PSIG | 222 SCFM |
| 275 PSIG | 234 SCFM |
| 300 PSIG | 255 SCFM |
| 325 PSIG | 275 SCFM |
| 350 PSIG | 295 SCFM |
Selection and Installation Notes
Match the original valve's inlet thread, specified relief pressure, required relieving capacity and certification. Do not select by thread size alone or increase the relief setting to prevent nuisance opening. The selected setting must comply with the equipment manufacturer's requirements and the protected vessel's maximum allowable working pressure. This valve does not replace the compressor's pressure switch or operating pressure control.
The available 25–350 PSIG settings describe separate preset variants, not a user-adjustable range. Install and service according to the equipment and valve manufacturer's instructions.







